Shenzhen UTOP Technology Co., Ltd.
To create high quality products and improve the image of the enterprise.
Add to Cart
10/100Mbps EOC Converter with POE function IP RJ45 Lan over 2wire twisted-pair extender 300m for CCTV IP cameras
Overview:
This Ethernet over 2-Wire Extender allows IP cameras to transmit over 2-Wire. It allows the system to extend IP cameras beyond cable distance limitations and also acts as a PoE inserter. The System transmits IP cameras over 2-Wire and can quickly turn any ordinary 2-Wire into a high speed network communication & PoE path. When operating over 2-Wire, the IP camera extender can operate for distances of up to 300 meters. NF-9802 Ethernet over 2-Wire extender system consists of a transmitter and receiver which require very little installation time & absolutely no set up or configuration.
Features:
1. Ethernet over 2-Wire - Converts Ethernet UTP to transmit network data and PoE over 2-Wire.
2. Saves costs and time – Avoids rewiring and expense of traditional Ethernet UTP cable.
3. High data rate – Support 100 Base-T for high network bandwidth requirements of Mega-pixel cameras or multiple IP cameras.
4. Easy to install - No IP or MAC address configuration and other networking setup required.
5. Easy upgrade to IP - Converts existing analog CCTV system over 2-Wire to retrofit analog CCTV installations into IP Digital systems.
6. Extends standard Ethernet – Transmits10/100Base-T up to distances of 300 meters
7. Compatible capability - Fully transparent to Ethernet networks and higher layer protocols.
Technical sheet:
| Interface | 10/100Base-TX IEEE 802.3af(15.4W) RJ45 ×1 2-Wire×1(Support POE/PSE-PD) |
| Transmission medium | 2-wire twisted-pair cables |
| LED Indicators | PWR(Power supply) M/S(Links/Data) LRE(Trunk Links) POE(Power over Ethernet) L/A(Links/Data) |
| Protocol standard | IEEE 802.3i,IEEE 802.3u,IEEE 802.3x Flow Control,IEEE 802.3af DTE Power via MDI |
| Data rate | 10/100Mbps |
| Transmission distance | 1500M(No POE), 0~300M(with POE) |
| Performance Specification | Store-and-forward |
| Network Latency | Less than 20µs for 64-byte frames in Store and forwardmode for 100Mbps to 100Mbps transmission |
| DC Power input | DC52V(Peak Value 44~56V) , UT-1EP2W-M |
| No power, UT-1EP2W-S | |
| Operating environment | Operating temperature; -10℃~ +50℃ Storage temperature: -20℃~ +70℃ Operating humidity: 10%-90% non-condensing |
| Dimension | 122*82*30mm |
Bandwith sheet:
| Transmission Distance | Coaxial Cable SVY75-5 | Twisted-pair cable Cat5e | Telephone Wire |
| 300M | 100Mbps | 78Mbps | 65Mbps |
| 600M | 90Mbps | 65Mbps | 55Mbps |
| 1200M | 78Mbps | 60Mbps | 35Mbps |
| 1500M | 50Mbps | 40Mbps | 25Mbps |
| 2000M | 30Mbps | 25Mbps | 15Mbps |
Products show:
Connection topology:
Order Models:
| UT-1E1C-S/M | 10/100Mbps 1*LAN+1*BNC, EOC Ethernet over Coaxial Extender,0~1.5km, Power Supply: DC12V | Pair |
| UT-1E2W-S/M | 10/100Mbps 1*LAN+2*2wire port, EOC Ethernet over twisted-pair cable Extender,0~1.5km, Power Supply: DC12V | Pair |
| UT-1EP1C-S/M | 10/100Mbps 1*LAN POE+1*BNC, POE+POC EOC Ethernet over Coaxial/twisted pair Extender, 0~300m, Power Supply: DC52V | Pair |
| UT-1EP2W-S/M | 10/100Mbps 1*LAN POE+1*2wire port, POE+POC EOC Ethernet over Coaxial/twisted pair Extender, 0~300m, Power Supply: DC52V | Pair |